• RM Chain Neck Guard, Riveted & Lightweight (6mm)
  • RM chain neck guard, riveted & lightweight (6mm)
1 2

Ulfberth

RM chain neck guard, riveted & lightweight (6mm)

$69.98 USD
$69.98 USD
Inkl. MwSt. Shipping wird beim Checkout berechnet.
Highlights

The Ulfberth RM neck guard is a high-quality addition to chainmail and armor, distinguished by its historical authenticity and lightness.

  • Authentic chainmail made of alternating riveted and punched rings based on historical models
  • Extremely small ring diameter of only 6 mm allows for a material thickness of 1 mm while maintaining full strength
  • Significant weight reduction of approximately 30 to 35 percent compared to conventional chainmail
  • Versatile use for reinforcing armor from antiquity to the late Middle Ages
  • Robust construction made of untreated steel, fully suitable for reenactment combat and extremely durable
Manufacturer's specifications

Ulfberth.dk, Kærdammen 27, 2605, Brøndby, Ulfberth.dk@gmail.com
#VALUE!
RM Chain Neck Guard, Riveted & Lightweight (6mm)
RM chain neck guard, riveted & lightweight (6mm)
RM Chain Neck Guard, Riveted & Lightweight (6mm)

RM chain neck guard, riveted & lightweight (6mm) in detail

Questions about the product RM chain neck guard, riveted & lightweight (6mm)

What specific advantages does the riveted RM chain neck guard offer compared to conventional protective devices in terms of durability under intensive use?

The riveted construction of the RM chainmail neck guard ensures that the individual rings will not bend or come loose, even under heavy mechanical stress or impacts. Compared to conventional, unriveted guards, this offers significantly greater stability and tear resistance. This considerably extends the lifespan during intensive use in staged combat or reenactments and minimizes maintenance costs due to lost rings.
What material was used for the riveted RM chain neck guard, and how does the inner diameter of 6 mm affect the protective effect and the mobility?

The RM chainmail neck guard is made of untreated, lightly oiled steel in the Roman Mail weave, where the rings are alternately riveted and punched. The small inner diameter of 6 mm, combined with the high ring density, provides excellent protection and suitability for stage combat, while the flexible chainmail weave simultaneously ensures good mobility in the neck and shoulder area.
For which types of chainsaws or bar lengths is the RM Rapid Micro saw chain with 6 mm (1/4 inch) pitch particularly suitable, and how is the optimal chain tension ensured for this fine-linked model?

The RM Rapid Micro saw chain with a 6.35 mm (1/4 inch) pitch is particularly suitable for carving chainsaws (such as the STIHL MS 194 C-E), battery-powered chainsaws (e.g., MSA 160), or smaller gasoline-powered chainsaws (e.g., MS 151). It is primarily used for demanding wood carving, tree care, and fine cuts.

Optimal chain tension is ensured as follows: - The chain must lie flat against the underside of the guide bar.

- On the top side, it should be possible to lift it approximately 5 millimeters in the center of the bar.

- With the chain brake released, it must be easy to pull the chain over the bar by hand (be sure to wear protective gloves).

- Depending on the model, the tension is adjusted using the side or front tensioning screw, or the quick-tensioning system with the engine switched off.
What specific cleaning steps or care instructions should be followed to protect the delicate 6 mm structure of the riveted RM chain neck guard from corrosion?

To protect the riveted RM chainmail neck guard from corrosion, the following care instructions should be observed: - Cleaning: Coarse dirt can be removed mechanically with a brush. For heavy soiling or to remove excess oil, the mesh can be soaked and washed in a tub of hot water with dish soap or bile soap.

- Drying: After contact with water, the neck guard must be thoroughly wiped with a cloth and then allowed to air dry completely.

- Oiling: Since the material is untreated, a regular film of oil is essential. After cleaning or after wearing, the mesh should be sprayed with universal oils such as WD-40 or Ballistol.

- Storage: For long-term storage, the neck guard should be lightly oiled and kept in a cloth bag in a dry place.

- Regular Wear: The friction of the rings against each other during wear often naturally wears off any surface rust that may have formed.